Pinewood Derby Inspection
When it comes time for the big race, there will be a large amount of excitement! Not only from the boys, but the whole family will be buzzing for the race to start. One very important (and time consuming) part is the inspection and weigh in of all participants. Our suggestion is to have this take place the night before Pack Meeting. Do not let the weigh in consume the whole night before. Have a designated time such as 7:00pm to 8:00pm and enlist your whole Cub Scout Committee along with your Den Chiefs. The night before is also a great time to set up all pennants, the track, and your chairs.
After each car has been inspected, no one should come in contact with the cars until it is time to start their engines.
All cars must pass the following inspection to qualify for the race:
- Width shall not exceed 2-3/4 inches.
- Length shall not exceed 7 inches.
- Weight shall not exceed 5 ounces.
- Axles, wheels, and body shall be from the materials provided in the kit.
- Wheel bearings, washers, and bushings are prohibited.
- No lubricating oil may be used. Axles may be lubricated with powdered graphite or silicone.
- The car shall not ride on any kind of spring.
- The car must be free-wheeling, with no starting devices.
- No loose materials of any kind are allowed in the car.
Items to have at the Inspections Station:
- Gorilla Glue - for emergency application of weights
- A Scale - One that registers ounces (postage scales work wonderful)
- Small round stickers (like the ones used at yard sales for the price) to mark and identify each car.
- Extra tools, graphite, weights, and sandpaper
- Extra car parts.
